shear angle
英 [ʃɪə(r) ˈæŋɡl]
美 [ʃɪr ˈæŋɡl]
网络 剪切角; 剪切角度
双语例句
- According to the minimum energy principle, the important parametr& shear angle in cutting process is calculated theoretically.
对切削过程中刀具刃口处消耗的能量进行了理论分析与公式推导，并根据最小能量原理对重要参数&剪切角进行了理论计算。 - A theoretic model of shear angle of KDP ultra-precision machining is built with the principle of the maximum specific energy of shear deformation and the mechanism of change of the shear modulus with different crystal planes and orientations.
其次根据剪切变形比能最大及单晶材料不同晶面晶向剪切弹性模量不同的原则，结合超精密切削模型，建立KDP晶体超精密切削各向异性的剪切角理论计算模型； - A series of experiments on conjugate shear angles have been systematically carried out with clay models. The data and curves obtained are given in the paper to show the effects of material property. limit stress and time on conjugate shear angle.
笔者采用粘土材料，对共轭剪切角进行了系统的实验分析，得到了一系列实验数据与实验曲线，以反映物性、极限应力及时间对共轭剪切角的影响。 - Shear angle increases with the increase in cutting speed.
切削过程中，剪切角随切削速度的增加而增大。 - The static yield shear angle may be a fixed value as 20.6 degree.
静态剪切屈服角基本上是一个20.6度的定值。 - The relevance of the Shear angle y and shearing stiffness measured by KES was discussed by comparative experiments in standard temperature and humidity. ( 4) Bending and shearing properties of fabrics were studied in the extremely cold environment.
通过标准温湿度下的对比实验，讨论了定负荷下测得的剪切角γ与KES测得的剪切刚度G的相关性，并作评价（4）低温下织物的弯曲和剪切性能测试研究。 - Shear Angle of Vector Magnetic Field
矢量磁场的剪切角 - The mechanisms of semi-periodic variation of chip thickness were discussed, and combining with shear angle changing and dynamic behaviour of microcracks, models of chip forming process were established for SiC_p/ Al composites with different reinforcement volume fraction. 2.
探讨了切屑厚度准周期变化的内在机制，将剪切角周期变化和微裂纹的动态影响相结合，建立了适应含不同颗粒体分比的该材料的切屑形成过程模型。 - Shear Angle research is one of the basic problems in metal cutting theory.
剪切角的研究是金属切削理论中的一个基本问题。 - Simulated the process of the orthodoxy cutting ( through the cutting tool against the work contacts up to the shear angle taking shape) precisely and vividly through the technology of digital simulation which based on the large software ANSYS.
基于大型有限元软件ANSYS平台，通过数值仿真技术，将直角切削过程（从刀具与工件接触到剪切角形成）精确而生动地模拟出来。